Flash Guide Number Explained
Author: Fiat Lux Guides Editorial Team Reviewer: Fiat Lux Guides Editorial Team Most recently reviewed First published Filed under Lighting Gear
A flash guide number (GN) measures a flash unit's maximum light output at a standard sensitivity—almost always ISO 100—by multiplying subject distance by the lens aperture (GN = distance × f-number). You can use it to compare raw flash power across speedlights or calculate manual flash exposure at any distance without a light meter.
Belongs to the guide: LED vs Strobe vs Speedlight: What to Start With
A flash guide number (GN) tells you how far a speedlight can reach at a given aperture—or which aperture to set for a given flash-to-subject distance—at ISO 100. Within our LED vs strobe vs speedlight guide series, this article walks through the guide number formula, why zoom and shutter speed change the rating, and how to use it for manual flash exposure.
What is the flash guide number formula?

The guide number equation connects flash power, distance, and aperture at ISO 100:
Guide Number = Distance × f-number
Rearranging the same formula gives you the exact manual aperture or maximum working distance:
- Find the right aperture:
f-number = Guide Number ÷ Distance - Find the maximum distance:
Distance = Guide Number ÷ f-number
For example, the Canon Speedlite EL-1 (Ver.2) lists a Standard guide number of 36.4 m (119.4 ft) at ISO 100 with its flash head zoomed to 50 mm. If your bare flash is 4.5 meters from your subject at full 1/1 power and ISO 100, the target aperture is 36.4 ÷ 4.5 ≈ f/8.
This inverse relationship between distance and aperture comes directly from the inverse-square law (HyperPhysics): doubling your flash distance cuts light intensity to one-fourth (two stops), so you must open the lens by two stops (halving the f-number) to keep exposure identical. You can check distance and guide-number math interactively with our light distance exposure calculator.
Why check units, zoom position, and ISO before comparing flashes?
A guide number is meaningless unless you know three conditions printed alongside it on the manufacturer’s spec sheet:
- Units (meters vs. feet): Always confirm whether the number is in meters or feet. The Nikon SB-800, for example, is rated at 38 m / 125 ft (at 35 mm zoom, ISO 100). Calling a flash “GN 125” without specifying feet makes it sound three times stronger than a “GN 38” metric rating, even though both describe the exact same output.
- Flash zoom head position: Speedlights shift an internal fresnel lens to match your camera lens focal length. Focusing the beam tighter concentrates more light into the center of the frame and inflates the guide number. On the Canon Speedlite EL-10, the Standard GN at ISO 100 climbs from 20.7 m at 24 mm, to 25.2 m at 35 mm, to 40.5 m at 105 mm. When comparing two speedlights, compare them at the same zoom setting (typically 35 mm or 50 mm).
- ISO sensitivity: Standard guide numbers assume ISO 100. If you raise ISO, the effective guide number scales by
√(ISO ÷ 100):- At ISO 200 (+1 stop): multiply GN by
√2 ≈ 1.41 - At ISO 400 (+2 stops): multiply GN by
√4 = 2.0 - At ISO 800 (+3 stops): multiply GN by
√8 ≈ 2.83
- At ISO 200 (+1 stop): multiply GN by
How do manual power steps and High-Speed Sync affect guide number?

Lowering manual flash power or enabling High-Speed Sync (HSS) reduces the effective guide number predictably:
- Manual power steps: Each halving of manual flash power (
1/1→1/2→1/4→1/8→1/16) drops output by one stop, which divides the guide number by√2 ≈ 1.414. You can see this directly in the Canon Speedlite EL-1 (Ver.2) manual power table: at 50 mm zoom (ISO 100), GN drops from 36.4 m at full power, to 9.1 m at1/16power (4 stops down,36.4 ÷ 4 = 9.1), and 6.4 m at1/32power. - High-Speed Sync (HSS): Above your camera’s normal flash sync speed, the flash pulses rapidly across the shutter travel, costing significant output. On the same EL-1 (Ver.2) at 50 mm, HSS drops the guide number from 36.4 m (normal sync) to 22.6 m at
1/125 s, 18.0 m at1/250 s, and 12.7 m at1/500 s.
When do guide numbers stop being accurate?
Guide numbers assume direct, bare-head flash aimed straight at the subject in a standard room. As soon as you bounce flash off a ceiling, shoot through a softbox or umbrella, or add diffusion domes, the modifier absorbs and scatters light, reducing the effective guide number.
For modified off-camera setups—explored in speedlight vs studio strobe and light modifiers explained—treat the guide number as a rough upper limit, then dial in final exposure using test frames, your camera’s histogram, or a handheld flash meter. See inverse square law of light and exposure basics for lighting for more on balancing flash power and aperture, and check our sourcing rules for how we verify manufacturer specs.
Common questions
What does a flash guide number mean?
A flash guide number (GN) is the product of flash-to-subject distance and the f-number required for proper exposure at ISO 100 and full 1/1 power. For example, a GN of 36 m means a subject 6 meters away needs f/6 (36 ÷ 6), while a subject 3 meters away needs f/12 (36 ÷ 3).
Why do guide numbers change with flash zoom head position?
When a speedlight's internal reflector zooms from a wide angle (like 24 mm) to a telephoto setting (like 105 mm or 200 mm), it concentrates the same total flash energy into a narrower beam. That tighter beam puts more light on the center of the frame, raising the guide number even though total energy did not increase.
How do I adjust guide number for ISO higher than 100?
Multiply the ISO 100 guide number by the square root of (ISO ÷ 100). Raising ISO from 100 to 400 (a two-stop sensitivity boost) multiplies the guide number by √4 = 2, doubling either your maximum flash reach or allowing an aperture two stops smaller at the same distance.
Are guide numbers listed in meters or feet?
Manufacturers usually publish guide numbers in both meters and feet, and mixing the two units causes major exposure errors. Always verify the unit on the spec sheet—for instance, 36 m equals roughly 118 ft—and match your distance measurement to the same unit.
Does a studio strobe use guide numbers or watt-seconds?
Studio strobes are usually rated in watt-seconds (Ws) or joules of stored electrical energy, though some makers also publish guide numbers with a standard reflector. Because modifiers like softboxes and umbrellas absorb and spread light differently, guide numbers apply mainly to bare or zoom-head speedlights.
What we checked
- Canon Speedlite EL-1 (Ver.2) Product Manual — Specifications (checked 2026-11-14) (cam.start.canon)
- Canon Speedlite EL-10 Product Manual — Specifications (checked 2026-11-14) (cam.start.canon)
- Nikon SB-800 AF Speedlight — Tech Specs (checked 2026-11-14) (nikonusa.com)
- HyperPhysics — Inverse Square Law for Light (checked 2026-11-14) (hyperphysics.phy-astr.gsu.edu)
You might also like
- LED vs Strobe vs Speedlight: What to Start With
Compare continuous LED lights, camera speedlights, and studio strobes by output units, shutter sync, color control, and video use to pick your first light.
- Battery vs Mains-Powered Lights for Photo and Video
Compare battery and AC mains-powered photo and video lights on output limits, runtime, cable safety, portability, and fan noise before you buy.
- Bi-Color vs RGB LED Lights: What Each Does
Bi-color vs RGB LED lights compared on CCT range, white-light brightness, CRI/TLCI accuracy, green-magenta tint, and creative color modes.
- Budget Photo and Video Lighting Kit Guide
Build a budget photo and video lighting kit around one key light, a modifier, and a stand. Compare starter kit categories by output and control.
- Continuous LED Lights for Beginners
Learn how continuous LED video and photo lights work, how CRI and TLCI ratings affect color accuracy, and how to compare panel and COB fixtures.
- DIY Reflector and Diffuser from Household Materials
Make passive photo and video reflectors and diffusers from foam board, poster board, and sheer fabric without electrical DIY or fire hazards.